distributeur français d’équipements et consommables pour l’industrie du Semiconducteur.

TA-3000 temperature conditioners (-65°C to +200°C)

Conditioners (Giraffe, Thermosteam) TA-3000: from -65°C to +200°C.

The MPI ThermalAir TA-3000 high-capacity temperature conditioner system is used for temperature testing, rapid thermal cycling and temperature characterization of components, hybrids, modules, printed circuit boards and other electronic and non-electronic components at precise temperatures from -65°C to +225°C.

The TA-3000's DC-controlled power adjusts almost instantly to your temperature settings and real-time test conditions, providing precise temperature control when you need it while saving energy.

Some applications :

  • Failure analysis test
  • Hot/Cold Temperature Cycle Tests
  • MIL-SPEC-883 Test Methods (Military and Space Applications)
  • Product Engineering
  • Semiconductor back-end testing
  • IC Test Handler
  • Functional test
  • Cooling test
  • Environmental Stress Test

The TA-3000's strengths :

  • Ergonomic and easily transportable device
  • Ultra-quiet !
  • Eco-friendly with up to 50% energy savings.
  • The efficiency of ultra-stable direct current temperature control
  • Ultra-cold temperatures maintained at 50 and 60 Hz
  • Color touch screen on the station for maximum ergonomics.
  • SSD for thermal file management and data logging
  • A single system worldwide compatible with all voltages and frequencies
  • No N2 or CO2 required (integrated air cooler and dryer).
  • Possibility of working remotely

The TA-3000's integrated air drying and filtration system sends clean, dry air (CDA) through its powerful internal cooler/heat exchanger to provide setpoint temperatures.

The user can control the TA-3000's outlet temperature flow rate from 4 to 16 SCFM (1.9 to 7.5 L/s), with continuous flow over the entire temperature range, 24/7.

The TA-3000's primary temperature control is achieved via the temperature thermocouple integrated into the outlet nozzle tip.
External thermocouples (type K or T) can also be used.

The MPI ThermalAir system also features multi-channel RTD and diode (resistance temperature detector) inputs for precise temperature control of the heat flow system.


Connect with our expert
Marie-Helene Bedelem
mh.beddelem@microtest-semi.com


Merci d'entrer vos coordonnées pour télécharger la fiche technique.